A340 Primary ECAM
by jerome meriweather

Left to STBY Horizon or Standbys
Right to Gear SEL
Down to Lower ECAM

To View a Control's Description, MouseOver it and ...
Click to "Show" - MouseDown to "Drag" - DoubleClick to "Hide"
Floor Message Thrust Limit N1 Rating Limit FLEX Temperature IDLE Message Check EWD Message N1 EGT N2 Fuel Flow Memo Area Fuel On Board Flaps & Slat
Flight Deck Photos and/or Graphic Facsimile
  

 

 

Flaps and Slat Position
Indicates current Flaps and Slats positions.
Fuel On Board Indication
An AMBER half box appears around FOB when the quantity shown is not fully usable.
Memo Area
Message Area. They are normally GREEN, but can be AMBER in case of abnormal situation.
Fuel Flow
GREEN Indication.
HP Rotor Speed N2
Digital indication normally GREEN is over brightning during engine start and located in a grey background box.
EGT Indicator
Text
LP Rotor Speed N1
Text
Check EWD Message
Is displayed AMBER on the EWD and on both ND in case of discrepancy between N1, N2, EGT, FF values on ECU-DMC bus and corresponding displayed information.
IDLE Message
Idle is displayed in GREEN when running engines operate at minimum power. First pulses for 10 seconds then remains steady.
FLEX Temperature
If a FLEX Temperature has been entered through MCDU and validated by the FADEC, this Temperature is displayed in BLUE.
N1 Rating Limit
Is computed by the FADEC according to the thrust lever angle, and displayed in GREEN.
Thrust Limit Mode
TOGA, FLX, CLB, MCT, Limit Mode selected by the Thrust lever is displayed in BLUE.
Floor Message
Is displayed AMBER when the ECUs receive the corresponding signal from FMGS.