Throttles
Transmit signals to the FADEC, which computes and displays the thrust rating limit and EPR. The throttle can only be moved manually.

There are five lever positions define by stops or detents:

• Reverse Idle
• Forward Idle
• Climb (CL)
• Continuous Thrust (FLX/MCT)
• TakeOff / Go Around (TO/GA)

Reverse Levers
Select Reverse Thrust by overriding the stop fitted at the FWD IDLE position. The stop is reset when the throttle is selected back to forward thrust.

Autothrottle Disconnect Switches ( RED Buttons )
When pressed, disconnects the autothrottle system.

Pitch Trim Wheels
Provides mechanical control of horizontal stabilizer trim. Trim wheels have priority over electrical control. Use of trim wheels does not disconnect the ELACs, as the override mechanism ensures that the computers remain synchronized with the manually selected position.

Trim wheels must be utilized when pitch direct law is in effect.

Pitch trim is automatically reset to 0 following touchdown as the pitch attitude becomes less than 2.5°.